Photos on Fabric

It always amazes me how quickly the months fly by, especially after summer is over. Once the fall hits things start happening so quickly! We definitely had an Indian summer here in Georgia, but now the temperatures are cooling down and the days are getting shorter.

I’ve been keeping busy in the studio these past couple months, in part because I’ve been inspired, but mainly because I can control the temperature in here and pretend we’ve been having that crisp autumn weather I love so much. One of my (creative) dreams came true last month; I successfully printed cyanotypes on fabric! Anyone who knows me will tell you I’m obsessed with denim, so naturally, I sourced some nice raw white denim from a local fabric shop for my prints. I also sampled a cotton/poly blend because the texture is more flat and even, but I settled on raw denim because I love the lines in the fabric and the frayed edges.

If you want to print cyanotypes on fabric, I would suggest using a cotton fabric with a low, even weave so that you can get as much image detail as possible. I am going for a unique collaboration of the two mediums I’m using here (cyanotype prints + fabric) so I don’t mind the loss of image detail I have on my prints. As always, for me, it’s all about the process.


LED UV Light Box

So, clearly I’m way into cyanotypes right now. But the process requires sunlight- and that’s not always feasible for me because I do a lot of my work at night. To make cyanotypes at home with a constant, reliable and controllable light source, I would need a UV light box.

Light boxes are priced in the thousands, even used ones can be quite expensive. There is a lot of information out there on how to build your own light box but most tutorials require bulbs. I wanted my light box to be as sleek and easy to build as possible. I discovered that a few people had successfully constructed light boxes with UV LED light strips.

There still isn’t a lot of information about this very specific topic out there so today I’m going to show you how I constructed my LED UV light box.WARNING: this process requires the use of a soldering iron and some electrical wiring. If you’re going to attempt to make a box like this one and you don’t know how to solder or anything about electrical wiring please get help from a pro.

If you are seriously serious about building a light box like this, please visit the following links. This thread on gives a general breakdown of how the box is made and this post on Greg Brophy‘s blog goes into much more detail. These are the sources I used to build my light box.


  • Two 20×24″ wooden boards
  • Two 4×24″ wooden planks
  • One 4×20″ wooden plank
  • Two reels of 5 meter 5050 LED UV lights 300 SMD 12V DC
  • 12 gauge speaker cable
  • 20 gauge copper wire
  • Soldering iron and solder
  • Power supply box
  • Power cord
  • Hammer and nails



I started with two 20×24 wooden boards, two 4×24 wood planks and one 4×20 plank. All of these were purchased from my local hardware store for like, $25. I sanded them all really well and made sure they were clean.



I took one of the 20×24 wood boards and measured in 2 inches all the way around. This created a 16×20 rectangle (the size of prints that I will be making). On the two shorter sides of the board I drilled a hole at the middle point on each side where I would later run the speaker cable through.



Next, I applied my LED light strips! I cut the strips so that they fit in my 16×20 rectangle in a staggered pattern shown above. When cutting the LED strips you have to make sure to cut between the copper pads, there is a tiny image of scissors on the strip to show where you can cut. Each copper plate has a + or a – next to it, it is very important to make sure they are all placed uniformly on the board. Just make sure when you are laying the strips on the board that all of the + signs are on the bottom. The LED strips have tape on the back so they stick easily to the wood. I accidentally bought the strips that came with the water protective coating on top. I had to pull it back and cut off a little to expose the copper plates for soldering.



I’ve got two pictures for this next part. I stripped two separate 3 foot sections of the 12 gauge speaker cable (including the red and black wires that are inside the white one) and ran it through the hols I drilled earlier. I made the black and red wires run in opposite directions (it doesn’t matter which way they go) and stapled them down to the board.



This next part got intense! I cut the 20 gauge copper wire into short pieces and used them to bridge the LED copper plates to the wires that were stapled on the sides. You can see them in the picture above. On the left side of the board, I soldered the little copper pieces to the – copper plate on the LED lights and on the right side I soldered them to the + plate. Then I soldered the tiny wires to the big speaker cable wires I stapled down earlier. Basically, this made the large speaker cable on the left side of my board carry the negative charge and the right side carry the positive charge.

At this point I wanted to see if all of my connecting and soldering was a success! I grabbed my power supply box and power cord. I connected my – and + speaker cables from the board to the – and + segments on the power supply box. Then I connected the power cord to the the power supply by matching the wires in the power cord to their respective segments on the power supply box: black is live, white is neutral and green is ground.

I plugged it in and and POW! it all worked!!!! So, that’s pretty much the hard part. The rest was a cake walk.



I took my other 20×24 board and hammered the 4×20, and two 4×24’s to it to create a three sided box.



So, at this point this is what my set up looked like.



Then I hammered the top of the box on so that the LED lights were the ceiling of the inside of the box. I left one of the short sides open so that I can slide my prints in and out easily. Later I will create a door to cover it, but for now this is cool.



Inside my UV LED light box!


This was a really fun project and I’m very please with how it came out. Hope you enjoyed seeing how I constructed my light box, comment if you have any questions or suggestion!


A Bit About Cyanotypes

The cyanotype process was discovered by Sir John Herschel in 1842. It’s a photographic process made from a light sensitive iron based solution painted onto thick paper (or fabric, wood, ceramic… basically anything porous). A lot of people use this method to make photograms, which are images made by placing an object directly on the paper (contact printing) such as flowers and leaves. Botanist Anna Atkins  used the cyanotype process to document different kinds of algae and was the first person to publish a photographic book, Photographs of British Algae: Cyanotype Impressions.

I’ve been working over the past couple months on my cyanotype set up at home. I built a UV light box to print with because light boxes are more reliable then sunlight. You can see how I constructed my light box here: LED UV Light Box DIY. I use the Photographers Formulary cyanotype kit which comes with all the chemicals you need plus instructions. The images I make are pretty big, 16×20, so I use a local photo lab to print my digital negatives.

This is a really great, hands on process. It’s easy to learn but not without its challenges. Figuring out exposure times and contrast control can depend on the type of paper you are using, your chemical mixture, UV light source and other things. However, the process is so rewarding these minor setbacks feel more like a fun puzzle.


First cyanotype before washing…


…and after washing.


Printing digital negatives in the photo lab.


Little cyanotype printed from original negative.


Little cyanotype printed from original negative.


Large print after exposure, before washing.


Prints drying.

When dreams become day jobs

My Cyanotype Project was an idea I got about a year ago. I’ve always been way into alternative photography, old processes and mixed media art and one day while daydreaming, they all kind of collided into this idea; mixed media cyanotypes! I thought about printing beautiful images on watercolor paper and then painting over them with bright, neon colors. I even thought of drawing over the images, or making double exposures… I just let my imagination run wild. At that same time I was in a pretty hardcore Sergio Leone phase. Spaghetti Westerns were all I was watching! So, that western influence trickled into my cyanotype/mixed media/alt photography idea. Another project I used to dream about was taking portraits of all of my girlfriends. Like, really natural, laid back photo shoots that celebrated the natural beauty of the women I know and love. At this point I had all the pieces and I just put them together; portraits of strong women printed using the cyanotype process, painted over or altered by hand in someway with a western vibe.

It’s been slow going over the past year. I began experimenting with paint and drawing to figure out a look and pallet that I like, I’ve been reading up on cyanotypes (which I will describe in detail in another post), and I’ve been compiling a list of supplies that I need to get going. I recently changed my schedule to allow more time for photography. I’ve decided to actually, actively give my dreams the fire they give me. Yesterday I did my first official photo shoot for this project and I couldn’t be more please with the images. This morning I ordered the supplies to build my own UV lightbox for cyanotype printing (construction of which will also be getting its own blog post). This thing is happening now, and it’s awesome!



Negatives from yesterdays shoot


Hampton, 2014

Oh! Hello.

I have been keeping busy catching up on work. Did you know I shot more film in 2014 then I did last year?

At that time I was obsessed with documenting the towns around where I lived (which was Hampton, CT). That area is known by the locals as “The Quiet Corner” because it is a very rural, somewhat low income pocket in the northwestern corner of CT. These towns used to host mills, factories and farms but now they are mostly residential.

Driving around Hampton made me feel like I was living in an old New England story. I couldn’t help but photograph it.

More to come.